Portable Car Show Display Stand

[snkchmr]

I dont even show my car & I had to have one of these. This would be great with all the wind we have. :tup:
http://img685.imageshack.us/img685/7154/13789222.jpg
http://img512.imageshack.us/img512/1941/82159482.jpg
http://img96.imageshack.us/img96/29/83189458.jpg (http://img96.imageshack.us/i/83189458.jpg/)
http://img402.imageshack.us/img402/5012/68068431.jpg (http://img402.imageshack.us/i/68068431.jpg/)

[superstang]

How much and how do i get one? jons38ct@yahoo.com or call or txt 860-777-8978

[z28th1s]

How much and how do i get one? jons38ct@yahoo.com or call or txt 860-777-8978

+1

Mike, let me know as I would be very interested if they aren't too expensive.

[BlkGT500nCA]

I dont even show my car & I had to have one of these. This would be great with all the wind we have.

Thanks Mike! I dropped your stand off at my powder coaters today.


How much and how do i get one? jons38ct@yahoo.com or call or txt 860-777-8978

email sent.


+1

Mike, let me know as I would be very interested if they are too expensive.

PM sent.

Hey everyone, my name is Brian Pancoast and I'd like to take this opportunity to tell everyone a little bit about my Portable Car Show Display Stands, and answer any questions you may have. Also, please feel free to send me an email at blkgt500nca@gmail.com

My stand is made from 5051 series aluminum which is machined for a perfect fit before it is TIG welded together. Next the stand is drilled and fitted for it's stainless steel locking hardware, then sent off to powder coating. Many color options are available.

http://img576.imageshack.us/img576/5273/ralcolorchart.jpg

As you can see there are 3 main pieces, Top, Middle, and base plate. The idea was to have a stand that was large enough to display a poster that people could actually read, but then could also be made small enough to fit in the trunk of the car.

http://img193.imageshack.us/img193/153/13944739.jpg

Flaws with other stands I've seen encouraged me to make this display. Did you know that some of the other stands out there actually lean against the side of your car for support? Others are so short, and close to the ground that nobody can, or wants to read them. I think my stand has a classy, industrial look to it that should address these issues and really make you stand out in a crowd.

This stand is very sturdy. There will be no wind, child, or adult knocking it into the side of your car. It's rock solid foundation begins by laying the baseplate down and driving the front tire of your car on it. Then the three pieces connect together by telescoping onto one another. A couple turns of the thumb screws on the back, and everything is tightly locked together.

http://img180.imageshack.us/img180/3457/dsc6150.jpg

http://img245.imageshack.us/img245/1111/85340748.jpg

http://img442.imageshack.us/img442/7587/52506541.jpg

http://img22.imageshack.us/img22/5973/dsc5173h.jpg (http://img22.imageshack.us/i/dsc5173h.jpg/)

http://img521.imageshack.us/img521/9639/dsc8759.jpg

http://img17.imageshack.us/img17/5918/dsc8763k.jpg

For the center piece that is riveted to the two legs, I offer different colored stripes for a $10 fee, or I can work with you to come up with a custom logo to place here, email me for details.

The top has a floating piece of acrylic sheet that is lifted off of the metal with 3/16 spacers. All of this is held together by Stainless steel button head screws and nylon locking nuts. There is also a hole in the top metal plate to assist with installation/removal of the artwork.

http://img709.imageshack.us/img709/3217/46327452.jpg

http://img686.imageshack.us/img686/6404/dsc5087s.th.jpg (http://img686.imageshack.us/i/dsc5087s.jpg/)

This stand holds a 18x24'' poster horizontally. Opening and closing the hood of your car is not a problem either. The overall height is 42'' assembled, and it weighs in at apx 20lbs. It literally comes apart in seconds to easily fit in the trunk. This display also stands freely without the weight of the car on it, allowing you to keep it in your basement or garage while not using it at shows. (at shows I highly recommend parking on the base for peace of mind)



Prices are:

$265 for raw aluminum stand.

Powder coating is between $75-100 (est)

Colored vinyl stripes are $10

*****PLUS SHIPPING & HANDLING*****

I have several stands already made, so if you're looking for a raw one, I can ship immediately. Powder coating usually takes between 5-7 business days.

Another thing I've brought to market are these "Please Do Not Touch" window clings. These are professionally printed and are designed to go on the outside of your window/windshield at shows to remind people to be respectful. The best thing about them is that they are removable and reusable. Dimensions are apx 3.5 x 11''

2 for $12

or

4 for $17

***** FREE SHIPPING *****

1 Pair FREE with the purchase of a stand.

http://img97.imageshack.us/img97/862/bm100250362proof5508.png (http://img97.imageshack.us/i/bm100250362proof5508.png/)

http://img403.imageshack.us/img403/1193/dsc6168copy.jpg

http://img682.imageshack.us/img682/7027/dsc6148.jpg

Remember, show season is right around the corner! If you're interested or have anymore questions, shoot me an email at blkgt500nca@gmail.com

I can also help you with your custom car show poster too.
http://img535.imageshack.us/img535/6539/dan1100.th.jpg (http://img535.imageshack.us/i/dan1100.jpg/)

http://img255.imageshack.us/img255/6211/hansposter2.th.jpg (http://img255.imageshack.us/i/hansposter2.jpg/)

http://img13.imageshack.us/img13/9162/rgbfinalproduct.th.jpg (http://img13.imageshack.us/i/rgbfinalproduct.jpg/)

http://img710.imageshack.us/img710/2782/39807805.th.jpg (http://img710.imageshack.us/i/39807805.jpg/)

Thanks everyone for your time!

-Brian
BlkGT500nCA

[1CRZHRS]

what size and how much are the posters?

[nckissfan]

that is very cool:tup:

[BlkGT500nCA]

what size and how much are the posters?

Posters for the stand are 18x24, but I can make them what ever size/shape you want. :tup:

Edit: Posters are $75 by themselves, or $50 with the purchase of a stand. Sorry about that. This is for a file on a disc, not and actual print.


that is very cool:tup:

Thank you!!!

[BlkGT500nCA]

Here is a Vista Blue stand I just finished up for an '08 GT500KR

http://img515.imageshack.us/img515/7750/dsc9329z.jpg

http://img24.imageshack.us/img24/7364/dsc9328y.jpg

http://img682.imageshack.us/img682/2813/dsc9319o.jpg

[cobra_4]

Those are sweet!!!!

[snkchmr]

Mine will be solid white & Im going to make a racecraft logo for the center.